E+H FMP50 Procurement and Replacement Guide

Endress+Hauser Levelflex FMP50 is a guided-wave radar instrument for continuous level measurement in basic liquid, paste and slurry applications. When purchasing FMP50-BCACCBAAA1GDJ+AAF371,2M, the full order code matters: probe type and length, process connection, wetted materials, pressure and temperature limits, communication, approvals and documentation must match the installation.

Where FMP50 fits best

Endress+Hauser positions the FMP50 for basic supply, storage and utility applications that do not demand extreme temperature, pressure or chemical resistance. It measures liquids, pastes and slurries, and the measuring principle is designed to remain reliable with changing media, temperature changes, gas blankets or vapors.

The manufacturer lists rod and rope versions with ±2 mm accuracy. Depending on configuration, the rod probe reaches 4 m and the rope probe 12 m; the listed process range is −20 to +80 °C and vacuum to 6 bar. Process connections include thread or adapter flange, while communication options can include 4–20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus and optional Bluetooth commissioning.

Procurement decision checklist

• Define the duty: medium, dielectric constant, vessel geometry, range, accuracy target and control or safety function.
• Select the probe: confirm rod or rope design, exact active length, mounting clearance and the effect of nearby internals.
• Confirm process conditions: temperature, pressure, coating, foam, agitation and chemical compatibility of all wetted materials.
• Check the mechanical fit: thread or flange, nozzle dimensions, probe anchoring needs and available installation space.
• Freeze integration and approvals: power, protocol, cable entries, hazardous-area approval, WHG/SIL requirements and calibration documents.
• Approve the full code: release FMP50-BCACCBAAA1GDJ+AAF371,2M only after the coded options and 2 m probe length are checked against the project specification.

Lead-time management

For shutdown-critical applications, approve technical alternatives before urgency removes engineering choices. Confirm whether a probe may be shortened or replaced in the field, which features are mandatory, and which common electronics or display spares should be held locally. Any deviation must be documented and accepted before ordering.

Replacing an old or discontinued level instrument

Start with the installed nameplate, complete order code and serial number. Record the probe type and exact length, process connection, mounting geometry, medium, temperature and pressure, materials, approvals, wiring, protocol, parameters and DCS scaling before selecting a successor.

1. Confirm the manufacturer’s lifecycle status and obtain the original configuration and parameter backup.
2. Compare probe, mechanical, process, electrical, communication and approval requirements item by item.
3. Identify flange adapters, gaskets, probe anchoring, cable entries or interface changes before the shutdown.
4. Plan parameter migration, empty/full calibration, loop checks, alarms, commissioning records and rollback.
5. Retain the old unit until the replacement has passed functional and process verification.

Important: FMP50, FMP51 and other Levelflex models are not automatically interchangeable. A similar product name does not guarantee the same probe, materials, process limits, approvals or communications. Validate the exact replacement against the complete application.

E+H Level Instruments in Demand

The following models are currently receiving strong enquiry. Please send the complete order code and quantity for configuration and availability checking.

and so on...