Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
General of Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
The FLK 789 ProcessMeter combines a loop calibrator with a DMM to give process technicians double the power in one tool. FLK 789 has a display thats twice as large and twice as bright with two levels of backlighting. The 789 loop calibrators also have a built-in, selectable 250 ohm HART ® resistor, eliminating the need to carry a separate resistor.
The FLK 789 ProcessMeter is a DMM designed to meet 1000 volt IEC 1010 CAT III standards and a precision 1000V, 440 mA True RMS meter. It can take frequency measurement to 20 kHz, has Min/Max/Average/Hold/ Relative modes, diode test and continuity beeper.
The dual display on FLK 789 loop calibrators also have an enhanced backlight with two brightness settings which can show simultaneously mA and % of scale readout. The 0-100% mA Span Check buttons toggle between 4 and 20 mA. The infrared I/O serial port is compatible with the FLK View Forms Software version 2.1. The fuses and battery are externally accessible for easy replacement.
Double your power of Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
The FLK 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of FLK Connect with ShareLive video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART resistor, it eliminates the need to carry a separate resistor with you.
Use the included FC Connector with the FLK 789 and get the full benefits of the FLK Connect® app. Download it now and get started.
Product overview: Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
FLK 789 ProcessMeter doubles your troubleshooting power and is FLK Connect-enabled
The FLK 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a loop calibrator with the power of a digital multimeter, and the wireless capabilities of FLK Connect connectivity with optional IR3000FC module. The 789 has a display that's not only twice as large as the FLK 787B, but also twice as bright with two levels of backlighting. And its built-in, selectable 250 ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the FLK Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.
Other useful features: Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
· Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
· Provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper
· Simultaneous displays mA and % of scale readings
· Provides 20 mA DC current source/loop calibrator/simulator
· Offers manual step (100%, 25%, Coarse, Fine) plus auto step and auto ramp
· Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
· Provides 1200 ohm drive capability on mA source
· Offers HART mode setting with loop power and a built-in 250 ohm resistor
· Offers externally accessible fuses and batteries for easy replacement
Fluke 789 Temperature Kit features: Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
* Unique new wireless measurement logging capability
* Temperature measurement from -200 °C to 1372 °C using the t3000 FC
* 24 V Loop power supply
* HART mode setting with loop power (adds 250 ohm resistor)
* 100% larger dual display
* 1200 ohm drive capability on mA source
* Enhanced backlight with two brightness settings
* 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
* Infrared I/O serial port compatible with
* FLK View Forms Software Version 2.1
* Externally accessible fuses for easy replacement
These 787 features are also included in the 789: Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
* DMM designed to meet 1000 volt IEC 1010 CAT III standards
* Precision 1000 V, 440 mA True-RMS digital multimeter
* Frequency measurement to 20 kHz
* Min/Max/Average/Hold/Relative modes
* Diode test and continuity beeper
* Simultaneous mA and% of scale readout
* 20 mA DC current source/loop calibrator/ simulator
* Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
* Externally accessible battery for easy battery changes
Specifications: Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
* FLK combined the DMM you trust with the loop calibrator you need.
* DMM and loop calibrator in one tool
* Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
* Externally accessible battery for easy battery changes.
* 1000V overload protection on V, ohms, frequency.
* 150V overload protection on mA, backed up by 440 mA 1000V fuse.
* 25% Manual Step plus Auto Step and Auto Ramp on mA output.
Precision 1000V, 440 mA digital multimeter : Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
* Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
* 0.1% dc voltage accuracy
* 0.05% dc current accuracy, 1 ‘A resolution to 30 mA
* Simultaneous mA and % of scale readout
* True rms ac voltage measurement to 1 kHz
* Frequency measurement to 20 kHz
* Min/Max/Average/TouchHold/Relative modes
* Diode test and continuity beeper
Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
DC current source/loop calibrator :
* 20 mA current source/simulator
* Simultaneous mA and % of scale readout
* Manual step (25%, coarse, fine) plus auto step and auto ramp
Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
Specifications | ||
Current measurement | Range | 0-1 A AC or DC |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD (DC) | |
Range | 0-30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 lSD | |
Current sourcing | Range | 0-20 mA or 4-20 mA |
Resolution | 0.05% of span | |
Drive capability | 24 V Compliance or 1200 Ω @ 20 mA | |
Frequency | to 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 Ω | |
Voltage measurement | Range | 0-1000 V AC (true-rms) or DC |
Resolution | 0.1 mV to 1.0 V | |
Accuracy | 0.1% Rdg + 1 LSD (V DC) | |
Resistance measurement | to 40 MΩ, 0.2% + 1 LSD | |
Diode test | 2.0 V shoes diode voltage drop | |
Display current and % of span | Yes | |
Auto Step, Auto Ramp | Yes |
Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
Including accessories:
- AC70A Alligator Clips
- C81Y Protective Yellow Holster with Flex-Stand™
- One 9V alkaline battery
- Quick Reference Guide
- TL75 Safety-Designed Test lead Set
- CD-ROM
Model Description of Fluke 789 FC ProcessMeter Fluke 789 Process Meter 250 Ohm HART Resistor
754 Documenting Process Calibrator-HART
753 Documenting Process Calibrator
726 Precision Multifunction Process Calibrator
725 Multifunction Process Calibrator
725Ex Intrinsically Safe Multifunction Process Calibrator
789 ProcessMeter
719 Pressure Calibrator
709 Precision Loop Calibrator
709H Precision Loop Calibrator with HART Communications / Diagnostics
707 Loop Calibrator with Quick Click Knob
707Ex Intrinsically Safe Loop Calibrator »
715 Volt/mA Calibrator »
705 Loop Calibrator »
771 Milliamp Process Clamp Meter »
772 Milliamp Clamp Meter »
787 ProcessMeterTM »
773 Milliamp Process Clamp Meter »
We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
We mainly supply Yokogawa ,Honeywell,Siemens,ABB,FLUKE,Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron,Pepperl+Fuchs,Hima,Yaskawa, Norgren, Hach, Weidmuller ,Phoenix,MTL,Testo etc.
Why choose us?
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
Packaging:
Imported with original packaging or standard export packing.Customize design is acceptable.
Contact:
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)